We manufacture and merchandise Bunsen Burners which are effectively used in the laboratories. Bunsen Burners requires a light flame. This flame consists of a pale violet / blue, bushy outer flame around a bright blue inner cone. The hottest part of the flame is at the tip of the inner cone. We take pride in burner's functionality so that all outdoor burners permit consumer use with confidence.

We manufacture Compact, Robust and Superbly Designed Canteen Burners. These Burners are available in Classy Princess Grey Color. Our Burners are an ideal choice for tea-stalls, canteens, and large families. They are equipped with features like tough cast iron body, with heavy pan support. Control valve with complete safety push-in arrangement and many more features..

We manufacture different kinds and shapes of Ribbon Burners. The ribbons are constructed of stainless steel and can be configured in many different patterns to achieve the desired capacity. They provide a very evenly distributed and stable flame over the entire range of turn down. An almost unlimited variety of flame lengths can be specified. Our Ribbon Burners are available in various shapes.

1) These high pressure burners are recommended for heating curved surface vessels as they produce powerful torch type flames.

2) Working pressure should not be varied by more than +0.07 kgf/cm2 (+1 psig). Use of these burners at pressure higher than 0.42 kgf/cm2 (6 psig) will result in wastage of gas. At a pressure of 20 psig, the gas consumption per hour will be double.

3) The nomenclature C-22 or C-35 is derived from the gas consumption rate which is 2.2 lb/hr for C-22 and 3.5 lb/hr and five lb/hr.for C-78 burner

1) These high pressure burners are recommended for heating curved surface vessels as they produce powerful torch type flames.

2) Working pressure should not be varied by more than +0.07 kgf/cm2 (+1 psig). Use of these burners at pressure higher than 0.42 kgf/cm2 (6 psig) will result in wastage of gas. At a pressure of 20 psig, the gas consumption per hour will be double.

3) The nomenclature T-22, T-35 & T-50, T-75 is derived from the gas consumption rate which is 2.2 lb/hr for T-22, 3.5 lb/hr for T-35 and T-75 is 5 lb/hr, 7.8 lb/hr for T-78 while T symbolises torch.

Gas operated low pressure infra red radiant burners can be adapted to rediant heat required.industrial users include brooding, curing, drying, food processing,almost all perposes where metal fabricating and finishing, textile drying and weld pre-heating, is required . This burner is supplied in varios length as per customers requirements